Carrying Out The Electrical Connection - RADEMACHER DuoFern 9484 Instruction Manual

i

9.3 Carrying out the Electrical Connection

1.
Ensure the mains are current-free and check whether the
inlet leads are current-free.
2.
Securely lay the connecting cables right into the flush-mounted
box.
3.
Remove the insulation on all leads down to 6 mm in length and
connect them according to the following connection diagram.
4.
After the electrical connection, the installation of the DuoFern
Motion Detector 9484 into the flush-mounted box is carried out,
see page 42.
EN
39