Selecting The Operating Mode - RADEMACHER DuoFern 9484 Instruction Manual

i

12. Selecting the Operating Mode

The DuoFern Motion Detector 9484 has two operating modes:
"automatic mode" and "manual mode". If required, the desired
operating mode can be enabled at any time.
Display the activated operating mode:
1.
1 x
Observe the indicator lights:
Switching on the automatic mode
1.
1 x
AUTO
Switching on the manual mode
1.
1 x
MANU
44
The active operating mode is displayed
every time the connected appliance is
switched on / off, see page 45.
= The automatic mode is enabled if
LEDs 1 and 3 light up red.
= The manual mode is enabled if
LEDs 3 and 5 light up red.
The automatic mode is switched on by
briefly tapping the AUTO button.
The manual mode is switched on by
briefly tapping the MANU button.
EN