The Function Of The Overload Protection - RADEMACHER DuoFern 9484 Instruction Manual

i

5.4 The Function of the Overload Protection

The DuoFern Motion Detector 9484 features an overload protec-
tion. Should the motion detector overheat due to overload, the
motion detector will switch off.
Display for overload
All of the indicator lights flash red.
Behaviour when the overload protection is triggered
If the overload protection has been triggered, the connected
appliance can no longer be switched on.
Resetting the Overload Protection
◆ to reset the protection function, the DuoFern Motion
Detector 9484 must be briefly disconnected from the
network
◆ or the operating unit must be pulled out of the installation
housing.
What can I do if the overload protection is regularly
triggered?
i
Please check that the connected appliance is not
exceeding the load limits, see page 24, "Technical
Specifications".
◆ Check that the cable cross-sections of the
connecting cables suffice.
EN
23