i
17.3 Logging-on to the HomePilot®
2.
+
3.
Both parts of the DuoFern Motion Detector 9484 are displayed
individually after logging on successfully.
The sensor part and the actuator part can be individually
named and marked with symbols.
4.
Save both parts individually.
The sensor part of the DuoFern Motion Detector 9484 is displayed
under "Sensors" with the corresponding status; the actuator part
is displayed under "Devices > Switches" and can be controlled
directly.
56
1 sec.
AUTO
Enable the registering mode of the
DuoFern Motion Detector 9484.
Simultaneously press and hold the
buttons for 1 second.
EN