RADEMACHER DuoFern 9484 Instruction Manual page 51

i
16. Setting the Run-on Time
i
Display the set run-on time
1.
4 sec.
MANU
2.
Increase / decrease the run-on time
1.
4 sec.
MANU
2.
Tap on
MANU
3.
Tap on
MANU
From a run-on time of 600 * 100 ms on, it is possible
to enable a switch-off advance warning (flashing prior
to the actual switch off ) by entering an uneven time
(e.g. 601 * 100 ms).
Press and hold the button
for approx. 4 seconds.
The run-on time is displayed after
approx. 4 seconds (example).
Press and hold the button.
+ After approx. 4 seconds, you can increase
the run-on time by additionally tapping
on the on/off button.
+ After approx. 4 seconds, you can decrease
AUTO
the run-on time by additionally tapping on
the AUTO button.
EN
51