Setting The Run-On Time - RADEMACHER DuoFern 9484 Instruction Manual

i

16. Setting the Run-on Time

With the run-on time, you can determine how long the connect-
ed appliance (e.g. lighting) remains switched on. There are five
different settings.
i
Observe the following whilst setting the indicator lights:
* After infinite adjustment in the HomePilot®, the indicator lights
approximately display the set run-on time per level.
Information on setting the run-on time in the HomePilot®
The run-on time is set in the HomePilot® under the description
"Stairway function" in "milliseconds [ ms ] with a factor 100 ms".
Example:
1 second
1 minute
3 minutes
50
With the HomePilot®, the run-on time can be
infinitely adjusted between 0.1 seconds
(pulsed operation) and approx. 55 minutes.
= 20 seconds
= 1 minute (factory setting)
= 3 minutes
= 10 minutes
= 30 minutes
= 10 *100 ms
= 600 *100 ms
= 1800 *100 ms
EN