Setting The Sensitivity - RADEMACHER DuoFern 9484 Instruction Manual

i

14. Setting the Sensitivity

The sensitivity of the DuoFern Motion Detector 9484 can be set
to five different levels.
Observe the following whilst setting the indicator lights:
Display the set sensitivity level
1.
4 sec.
AUTO
2.
Increase / decrease the level of sensitivity
1.
AUTO
2.
Tap on
3.
Tap on
46
+
AUTO MANU
+
AUTO
= minimum sensitivity
= maximum sensitivity
(factory setting)
Press and hold the button for
approx. 4 seconds.
The sensitivity level is displayed after
approx. 4 seconds (example).
Press and hold the AUTO button.
After approx. 4 seconds, you can increase
the sensitivity by additionally tapping on
the MANU button.
After approx. 4 seconds, you can decrease
the sensitivity by additionally tapping on
the on/off button.
EN