Menu 9 - Logging Duofern Devices On/Off - RADEMACHER 9499 Instruction Manual

i

13. Menu 9 - Logging DuoFern devices on/off

In this menu you can log DuoFern devices on and off from the DuoFern
Sun/Wind Sensor. The menu also provides the "Clear-up" option to
remove unavailable devices from the DuoFern Sun/Wind Sensor.
Maximum number of logged-on devices
You can log a maximum of 3 DuoFern devices on to the DuoFern Sun/
Wind Sensor.
Further information about logging on can be obtained from our website
at:
www.rademacher.de
Conditions of use for the sun function
In order for the sun function of the DuoFern Sun/Wind Sensor to work,
the following functions must be configured on some DuoFern devices
(preferably before logging on!):
◆ Total running time
◆ If the device has a connection option for its own sun sensor, set the
mode to "External sun sensor"
◆ Sunshine position (recommendation: 100 %)
◆ Activate the automatic sun function
These settings are usually not required for more recent flush-mounted
actuators/tubular motors.
These settings must be checked for devices that have a display or can
be operated in a normal installation situation (e.g. Troll, RolloTron, etc.).
To do so, please also read the operating manual of the
respective DuoFern device.
EN
29