Introduction; Purpose Of The Manual; Additional Resources; Document And Software Version - Danfoss VLT Decentral Drive FCD 302 Operating Manual

Introduction

1 Introduction

1.1 Purpose of the Manual

This operating guide provides information for safe instal-
lation and commissioning of the frequency converter.
The operating guide is intended for use by qualified
personnel.
Read and follow the instructions to use the frequency
converter safely and professionally, and pay particular
attention to the safety instructions and general warnings.
Always keep this operating guide available with the
frequency converter.
®
VLT is a registered trademark.

1.2 Additional Resources

Supplementary publications and manuals are available.
•
®
The VLT AutomationDrive FC 301/302
Programming Guide provides greater detail on
working with parameters and many application
examples.
•
®
The VLT Decentral Drive FCD 302 Design Guide
provides detailed information about capabilities
and functionality to design motor control
systems.
•
Instructions for operation with optional
equipment.
See www.danfoss.com/BusinessAreas/DrivesSolutions/
Documentations/VLT+Technical+Documentation.htm.

1.3 Document and Software Version

This manual is regularly reviewed and updated. All
suggestions for improvement are welcome. Table 1.1 shows
the document version and the corresponding software
version.
Edition Remarks
MG04F5xx STO functionality has been
updated.
Table 1.1 Document and Software Version

1.4 Product Overview

1.4.1 Intended Use
The frequency converter is an electronic motor controller
intended for:
MG04F502
Operating Guide
•
•
The frequency converter can also be used for motor
overload protection.
Depending on the configuration, the frequency converter
can be used in standalone applications or form part of a
larger appliance or installation.
The VLT
mounting, for example, in the food and beverage industry,
or for other material handling applications. With the FCD
302, it is possible to reduce costs by placing the power
electronics decentrally. Central panels are then rendered
obsolete, saving cost, space, and effort for installation and
wiring. The basic design is service-friendly, with a
pluggable electronic part, and a flexible and "spacious"
wiring box. It is easy to change electronics without the
need for rewiring.
The FCD 302 is designed according to the EHEDG
guidelines, suitable for installation in environments with
high focus on ease of cleaning.
NOTICE
Only frequency converters configured as hygienic
enclosure designation, FCD 302 P XXX T4 W69, have the
EHEDG certification.
Installation environment
The frequency converter is allowed for use in residential,
industrial, and commercial environments in accordance
with local laws and standards.
NOTICE
Software version
7.5X
In a residential environment, this product can cause
radio interference, in which case supplementary
mitigation measures can be required.
Foreseeable misuse
Do not use the frequency converter in applications which
are non-compliant with specified operating conditions and
environments. Ensure compliance with the conditions
specified in chapter 7 Specifications.
Danfoss A/S © 11/2016 All rights reserved.
Regulation of motor speed in response to system
feedback or to remote commands from external
controllers. A power drive system consists of the
frequency converter, the motor, and equipment
driven by the motor.
System and motor status surveillance.
®
Decentral Drive FCD 302 is designed for decentral
1 1
3