Mechanical Installation; Unpacking; Items Supplied; Product Identification - Danfoss VLT Decentral Drive FCD 302 Operating Manual

Mechanical Installation

3 Mechanical Installation

3.1 Unpacking

3 3

3.1.1 Items Supplied

The packaging contains:
•
Accessories bag, supplied only with order of
installation box. Contents:
-
-
-
-
-
•
Operating Guide
•
Frequency converter
Depending on options fitted, the box contains 1 or 2 bags
and 1 or more booklets.
Procedure
1. Make sure the items supplied and the information
on the nameplate correspond to the order confir-
mation.
2. Check the packaging and the frequency converter
visually for damage caused by inappropriate
handling during shipment. File any claim for
damage with the carrier. Retain damaged parts
for clarification.
10
®
VLT
2 cable clamps
Bracket for motor cables and loads
cables
Elevation bracket for cable clamp
Screw 4 mm x 20 mm
Thread forming 3.5 mm x 8 mm
Danfoss A/S © 11/2016 All rights reserved.
Decentral Drive FCD 302

3.1.2 Product Identification

VLT®
1
T/C: FCD302P1K5T4W66H1X1XMFCFXXXXA0BXXXXXXDX
2
P/N: 131Z5118
4
1.5kW(400V) / 2.0HP(460V)
5
IN: 3x380-480V 50/60Hz, 3.7/3.1A
6
OUT: 3x0-Vin 0-590Hz, 4.1/3.4A
7
IP66 Enclosure Tamb. 40 ˚C/104 ˚F
9
1 Type code
2 Ordering number
3 Serial number
4 Power rating
Input voltage, frequency, and current (at low/high
5
voltages)
Output voltage, frequency, and current (at low/high
6
voltages)
7 IP rating
8 Maximum ambient temperature
9 Certifications
10 NEMA enclosure type
Illustration 3.1 Product Nameplate (Example)
NOTICE
Do not remove the nameplate from the frequency
converter (loss of warranty).

3.2 Mounting

NOTICE
In environments with airborne liquids, particles, or
corrosive gases, ensure that the IP/type rating of the
equipment matches the installation environment. Failure
to meet requirements for ambient conditions can reduce
the lifetime of the frequency converter. Ensure that
requirements for air humidity, temperature, and altitude
are met.
Vibration and shock
The frequency converter complies with requirements for
units mounted on the walls and floors of production
premises, and in panels bolted to walls or floors.
For detailed ambient conditions specifications, refer to
chapter 7.4 Ambient Conditions.
Enclosure rating:
Decentral Drive
Type 4X Indoor Use Only
www.danfoss.com
LISTED E134261 76X1 IND. CONT. EQ.
S/N: 000000G000
8
Danfoss A/S
6430 Nordborg
Denmark
MADE IN DENMARK
10
3
MG04F502