Graphic Local Control Panel Layout - Danfoss VLT Decentral Drive FCD 302 Operating Manual

Commissioning
NOTICE
During start-up, the LCP shows the message INITIALISING.
When this message is no longer shown, the frequency
converter is ready for operation. Adding or removing
options can extend the duration of start-up.

5.2.1 Graphic Local Control Panel Layout

The graphic local control panel (GLCP) is divided into 4
functional groups (see Illustration 5.1).
A. Display area.
B. Display menu keys.
C. Navigation keys and indicator lights.
D. Operation keys and reset.
1
Status
799 RPM 7.83 A
0.000
2
A
53.2 %
4
Auto Remote Ramping
6
Quick
Status
B
Menu
7
10 C
On
OK
15
Warn.
16
Alarm
17
D Hand
Off
on
18 19
Illustration 5.1 GLCP
A. Display area
The display area is activated when the frequency converter
receives power from the mains voltage, a DC bus terminal,
or a 24 V DC external supply.
The information shown on the LCP can be customized for
user applications. Select options in the Quick Menu Q3-13
Display Settings.
MG04F502
Operating Guide
3
1(1)
36.4 kW
5
9
Main Alarm
Menu Log
8
11
12
13
Auto
Reset
on
14
20 21
Danfoss A/S © 11/2016 All rights reserved.
Display Parameter
1 Parameter 0-20 Display
Line 1.1 Small
2 Parameter 0-21 Display
Line 1.2 Small
3 Parameter 0-22 Display
Line 1.3 Small
4 Parameter 0-23 Display
Line 2 Large
5 Parameter 0-24 Display
Line 3 Large
Table 5.1 Legend to Illustration 5.1, Display Area
B. Display menu keys
Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Key Function
6 Status Shows operational information.
7 Quick Menu Allows access to programming parameters
for initial set-up instructions and many
detailed application instructions.
8 Main Menu Allows access to all programming
parameters.
9 Alarm Log Shows a list of current warnings, the last
10 alarms, and the maintenance log.
Table 5.2 Legend to Illustration 5.1, Display Menu Keys
C. Navigation keys and indicator lights (LEDs)
Navigation keys are used for programming functions and
moving the display cursor. The navigation keys also
provide speed control in local operation. There are also 3
frequency converter status indicator lights in this area.
Key Function
10 Back Reverts to the previous step or list in the
menu structure.
11 Cancel Cancels the last change or command as long
as the display mode is not changed.
12 Info Press for a definition of the function being
showed.
13 Navigation Press the navigation keys to move between
Keys items in the menu.
14 OK Press to access parameter groups or to
enable a selection.
Table 5.3 Legend to Illustration 5.1, Navigation Keys
Default setting
[1617] Speed [RPM]
[1614] Motor Current
[1610] Power [kW]
[1613] Frequency
[1602] Reference %
5
27
5