Status Group - YOKOGAWA PZ4000 User Manual

4.19 STATus Group

The commands in the STATus Group are used to set and query the status report.
There are no front-panel keys that correspond to the commands in this group. For the status report, see chapter
5.
:STATus :
QMESsage
:STATus?
Function Queries all settings related to the
communication status function.
Syntax :STATus?
Example :STATUS?→:STATUS:EESE 0;FILTER1 NEVER;
FILTER2 NEVER;FILTER3 NEVER;
FILTER4 NEVER;FILTER5 NEVER;
FILTER6 NEVER;FILTER7 NEVER;
FILTER8 NEVER;FILTER9 NEVER;
FILTER10 NEVER;FILTER11 NEVER;
FILTER12 NEVER;FILTER13 NEVER;
FILTER14 NEVER;FILTER15 NEVER;
FILTER16 NEVER;QENABLE 0;QMESSAGE 1
:STATus:CONDition?
Function Queries the status register.
Syntax :STATus:CONDition?
Example :STATUS:CONDITION?→16
Description For the description regarding how to
synchronize the program using the
:STATus:CONDition
IM 253710-11E
;
CONDition ?
EESE <Space>
?
EESR ?
ERRor ?
FILTer <x>
QENable <Space>
?
<Space>
?
SPOLl ?
?
command, see page 3-8.
<Register>
<Space> RISE
FALL
BOTH
NEVer
?
OFF
ON
<NRf>
OFF
ON
<NRf>
:STATus:EESE
(Extended Event Status Enable register)
Function Sets the extended event enable register or
queries the current setting.
Syntax :STATus:EESE <Register>
:STATus:EESE?
<Register> = 0 to 65535
Example :STATUS:EESE #B00000000
:STATUS:EESE?→:STATUS:EESE 0
:STATus:EESR?
(Extended Event Status Register)
Function Queries and clears the extended event register.
Syntax :STATus:EESR?
Example :STATUS:EESR?→0
4.19 STATus Group
4-71
4