GIA 63 Message Advisories (Cont.)
Alerts Window Message
G/S1 FAIL – G/S1 is inoperative.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs service.
Return unit for repair.
G/S2 SERVICE – G/S2 needs service.
Return unit for repair.
GEA 71 Message Advisories
Alerts Window Message
GEA1 CONFIG – GEA1 configuration
error. Config service req'd.
MANIFEST – GEA1 software
mismatch. Communication halted.
BACKUP PATH – EIS using backup
data path.
GTX 33 Message Advisories
Alerts Window Message
XPDR1 CONFIG – XPDR1 config error.
Config service req'd.
MANIFEST – GTX1 software mismatch.
Communication halted.
BACKUP PATH – Transponder using
backup data path.
Comments
A failure has been detected in glideslope receiver 1 and/or receiver 2. The G1000
system should be serviced.
A failure has been detected in glideslope receiver 1 and/or receiver 2. The receiver
may still be available. The G1000 system should be serviced when possible.
Comments
The GEA 71 configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
The GEA 71 has incorrect software installed. The G1000 system should be serviced.
The GEA 71 is using a backup communication path. The G1000 system should be
serviced when possible.
Comments
The transponder configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
The transponder has incorrect software installed. The G1000 system should be
serviced.
The transponder is using a backup communications path. The G1000 system should
be serviced when possible.
Garmin G1000 Cockpit Reference Guide for Cessna Nav III
APPENDIX A
149