Navigation Radios
Pressing DME, ADF, NAV1, or NAV2 selects and
deselects the radio source and activates the annuncia-
tor. Selected audio can be heard over the headset and
the speakers. All radio keys can be selected individually
or together.
Figure 4-5 Navigation Radios
Input
PILOT Key Press
COPLT Key Press
Current ICS Isolation State
PILOT
COPILOT
ALL
CREW
Table 4-2 ICS Isolation Mode Transitions
Garmin G1000 Cockpit Reference Guide for Cessna Nav III
Intercom System (ICS) Isolation
The intercom system (ICS) provides four (4) isolation
modes: ALL, PILOT, COPILOT and CREW. The desired
mode can be selected or deselected using the PILOT and
COPLT keys.
PILOT Mode
PILOT mode is selected when only the PILOT key
is annunciated. In PILOT mode, the pilot can hear the
selected radios, the copilot can hear MUSIC 1, the pas-
sengers can hear MUSIC 2, and the copilot and passengers
can communicate with each other.
COPILOT Mode
COPILOT mode is selected when only the COPLT key
is annunciated. In COPILOT mode, the copilot is isolated
from everyone else. The pilot and passengers can hear the
selected radios and communicate with each other. In this
mode, the pilot can hear MUSIC 1, while the passengers
can hear MUSIC 2.
The possible ICS isolation states are summarized in
Table 4-2.
Figure 4-6 ICS Isolation
CREW
CREW
COPILOT
ALL
PILOT
SECTION 4 – AUDIO PANEL
ALL
PILOT
COPILOT
67