Garmin G1000 Reference Manual page 103

Cessna nav iii
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

• Changing the range of the map: The current map
range is indicated in the lower right corner of the
display. The map range is adjustable from 500 feet
to 2,000 nm. The auto zoom feature is described in
the G1000 Multi Function Display Pilot' s Guide.
To change the map range:
1.
Rotate the JOYSTICK control.
• Panning around the map: Panning allows you
to move the map beyond its current limits without
adjusting the map range. When the panning func-
tion is selected by pushing the JOYSTICK in, a pan-
ning arrow flashes on the map display. A window
appears at the top of the map display, showing the
latitude/longitude position of the pointer as well
as the bearing and distance to the pointer from the
aircraft present position.
To pan the map:
Press the JOYSTICK control to display the pan-
1.
ning arrow.
2.
Move the JOYSTICK to place the panning arrow
at the desired location. When the panning
arrow is placed on an object, the object name is
highlighted, even if the name was not originally
displayed on the map.
NOTE: This feature applies to everything that is
displayed on the map with the exception of route
lines. When an airport, navaid, or user waypoint
is selected on the map display, information about
the waypoint can be reviewed and the waypoint
can be designated as the direct-to destination.
Garmin G1000 Cockpit Reference Guide for Cessna Nav III
3.
To turn off the panning arrow and return to
the display to the current position, press the
JOYSTICK again, or in one minute the panning
arrow is removed.
• Restoring default page settings: Pressing the
BACK softkey resets the MFD softkeys to their
original settings.
• Identifying Map Symbols: The G1000 Multi
Function Display Pilot' s Guide describes the avia-
tion, basemap, weather, traffic, and miscellaneous
symbology used on the Navigation Map Page.
NOTE: Other Navigation Map operations such
as changing the map heading reference, and
measuring the bearing and distance between
points are described in the G1000 Multi Function
Display Pilot's Guide.
SECTION 5 – MFD
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents