Gea 71H Message Advisories - Garmin G1000H Cockpit Reference Manual

GIA 63H MESSAGE ADVISORIES (CONT.)
Message
TRUE APR – True north approach.
Change HDG reference to TRUE.
GPS1 SERVICE – GPS1 needs
service. Return unit for repair.
GPS2 SERVICE – GPS2 needs
service. Return unit for repair.
NAV1 SERVICE – NAV1 needs
service. Return unit for repair.
NAV2 SERVICE – NAV2 needs
service. Return unit for repair.
NAV1 RMT XFR – NAV1 remote
transfer key is stuck.
NAV2 RMT XFR – NAV2 remote
transfer key is stuck.
G/S1 FAIL – G/S1 is inoperative.
G/S2 FAIL – G/S2 is inoperative.
G/S1 SERVICE – G/S1 needs service.
Return unit for repair.
G/S2 SERVICE – G/S2 needs service.
Return unit for repair.

GEA 71H MESSAGE ADVISORIES

Message
GEA1 CONFIG – GEA1 config error.
Config service req'd.
MANIFEST – GEA1 software
mismatch, communication halted.
190-01254-00 Rev. A
Comments
Displayed after passing the first waypoint of a
true north approach when the nav angle is set to
'AUTO'.
A failure has been detected in the GPS1 and/or
GPS2 receiver. The receiver may still be available.
The system should be serviced.
A failure has been detected in the NAV1 and/or
NAV2 receiver. The receiver may still be available.
The system should be serviced.
The remote NAV1 and/or NAV2 transfer switch is
stuck in the enabled (or "pressed") state. Press
the transfer switch again to cycle its operation.
If the problem persists, the system should be
serviced.
A failure has been detected in glideslope receiver 1
and/or receiver 2. The system should be serviced.
A failure has been detected in glideslope receiver
1 and/or receiver 2. The receiver may still be
available. The system should be serviced when
possible.
Comments
The GEA1 configuration settings do not match
those of backup configuration memory. The
G1000H system should be serviced.
The #1 GEA 71 has incorrect software installed.
The G1000H system should be serviced.
Garmin G1000H Cockpit Reference Guide for the Bell 407GX
™
Annunciations & Alerts
95