Customized Display; Figure 6-2 Lightning Display Range Annunciation; Figure 6-3 Weather Group Options Menu - Garmin G1000 Reference Manual

To change the display range on the Navigation Map
Page, turn the joystick clockwise to zoom out or turn the
joystick counter-clockwise to zoom in.
NOTE: At a map range of less than 25 nm,
Stormscope lightning data is not displayed but
can still be present. The presence of Stormscope
lightning data is indicated by the annunciation
in the upper right hand corner 'LTNG < 25 nm'.

Figure 6-2 Lightning Display Range Annunciation

Customized Display

NOTE: The Stormscope has to be receiving valid
heading information in order for Stormscope
lightning data to be displayed.
The pilot can customize the display of Stormscope
lightning data on the Navigation Map Page using the
Weather Group Options Menu.
To display the Weather Group Options Menu:
1. With the Navigation Map Page displayed, press
the MENU key to display the Navigation Map
Page Menu. The cursor flashes on the 'Map
Setup' option.
2. Press the ENT key. The Map Setup Menu is
displayed. Turn the small FMS knob to select
the 'Weather' group.
Garmin G1000 Cockpit Reference Guide for Cessna Nav III
OPTIONAL INTERFACES

Figure 6-3 Weather Group Options Menu

The followings options are available:
To display/remove Stormscope Lightning
Data:
1. With the Weather group selected, press the
ENT key. The cursor flashes on 'STRMSCP
LTNG'.
2. Turn the small or large FMS knob to display
the 'On/Off' window.
Turn either the small or large FMS knob to
3.
select 'On' (display Stormscope lightning) or
'Off' (remove Stormscope lightning). Press the
ENT key.
Press the FMS knob to return to the Navigation
4.
Map Page.
SECTION 6 – MFD
113