Figure 3-24 Wpt - Airport Information Page (Apr) - Garmin G1000 Reference Manual

SECTION 3 – NAV/COM &
TRANSPONDER
To load the desired COM frequency into the
COM tuning box:
1. When the list of frequencies for the selected
airport is displayed, highlight the desired fre-
quency by turning the large FMS knob.
2. Press the ENT key.
NOTE: The runway Pilot Controlled Lighting (PCL)
frequency (located in the Runways box of the
INFO portion of the Airport Information Page)
may also be highlighted with the large FMS knob
and loaded into the COM tuning box by pressing
the ENT key.
50
Figure 3-24 WPT – Airport Information Page (APR)
Garmin G1000 Cockpit Reference Guide for Cessna Nav III
To load the primary approach NAV frequency
into the NAV tuning box:
On the Airport Information Page, press the APR
1
softkey to display approach information for a
specific airport.
2. Press the FMS knob to activate the selection
cursor in the window.
Turn the large FMS knob to highlight the
3.
primary NAV frequency located in the Primary
Frequency box.
Press the ENT key.
4.