Figure 2-2A Pfd Softkeys (1 Of 2) - Garmin G1000 Reference Manual

XPDR – Press to display the transponder mode selec-
tion softkeys.
STBY – Press to select standby mode.
ON – Press to select mode A.
ALT – Press to select altitude reporting mode.
VFR – Press to automatically squawk the VFR code
(1200 in U.S.).
CODE – Press to display transponder code selection
softkeys 0-7.
0 through 7 - Press numbers to enter code.
BKSP - Press to remove numbers entered one
at a time.
IDENT – Press to provide special aircraft position
identification to Air Traffic Control (ATC).
BACK – Press to return to the previous level soft-
keys.
OFF
INSET
DCLTR
TRAFFIC TOPO
Press the BACK or OFF softkey
to return to the top level
DCLTR-1
softkeys
DCLTR-2
DCLTR-3

Figure 2-2a PFD Softkeys (1 of 2)

Garmin G1000 Cockpit Reference Guide for Cessna Nav III
IDENT – Press to provide special aircraft position
identification to ATC.
TMR/REF – Press to display the References window.
NRST – Press to display the Nearest Airports
window.
ALERTS – Press to display the Alerts window.
STRMSCP BACK
TERRAIN
SECTION 2 – PFD
ALERTS
15