Selecting A Nav Radio; Figure 3-18 Selecting A Nav Radio - Garmin G1000 Reference Manual

SECTION 3 – NAV/COM &
TRANSPONDER

Selecting a NAV Radio

The desired NAV radio can be selected using the CDI
softkey located on the PFD. The three navigation modes
that can be selected with the CDI softkey are as follows:
• VOR1 (or LOC1) – If NAV1 is selected as the NAV
mode, a single green arrow labeled either 'VOR1'
or 'LOC1' is displayed on the HSI and the active
NAV1 frequency is displayed in green.
• VOR2 (or LOC2) – If NAV2 is selected as the NAV
mode, a double green arrow labeled either 'VOR2'
or 'LOC2' is displayed on the HSI and the active
NAV2 frequency is displayed in green.
• GPS – If GPS mode is selected, a single magenta
arrow appears on the HSI and neither NAV radio
is selected.
NOTE: In GPS mode, both active NAV frequencies
are displayed in white.
NOTE: When a VOR signal is received, the cor-
responding VOR/LOC name identifier is displayed
to the right of the associated active NAV fre-
quency.
46 Garmin G1000 Cockpit Reference Guide for Cessna Nav III
NAV radio selection is
performed via the CDI
softkey.

Figure 3-18 Selecting a NAV Radio