Introduction To Instrument Approach Procedures; Arrivals And Departures; Figure 5-12 Procedures Page - Garmin G1000 Reference Manual

SECTION 5 – MFD
5.10 Introduction to Instrument Approach
Procedures

Arrivals and Departures

Based upon the active flight plan or direct-to destina-
tion, the Procedures Page provides direct access to ap-
proaches, departures (DPs) and arrivals (STARs). In either
case, the departure and destination airports must have as-
sociated published procedures. The Procedures Page is
displayed by pressing the PROC key.

Figure 5-12 Procedures Page

96 Garmin G1000 Cockpit Reference Guide for Cessna Nav III
To select a departure:
1. Press the PROC key to display the Procedures
Page.
Turn the large FMS knob to highlight 'Select
2.
Departure' and press the ENT key.
3. The 'Departure Loading' page appears with
the list of departure options for the departure
airport. Use either the large or small FMS knob
to enter the desired departure. Press the ENT
key.
'Load?' is highlighted. Press the ENT key. The
4.
departure becomes part of the Flight Plan.
To select an arrival:
1. Press the PROC key to display the Procedures
Page.
Turn the large FMS knob to highlight 'Select
2.
Arrival' and press the ENT key.
3. The procedures page appears. Use the large and
small FMS knobs to enter the desired arrival.
'Load?' is highlighted. Press the ENT key. The
4.
arrival becomes part of the Flight Plan.