Advertisement
M9000DT-M, WSM
6. FRONT AXLE
[1] MECHANISM
(1) Structure
(1) Front Axle
(2) Oil Seal
(3) Internal Snap Ring
(4) Planetary Gear Support
(5) Planetary Gear Pin
(6) 22T Planetary Gear
(7) Front Axle Case Support
(8) 19T Bevel Gear
The front axle of the Mudder type is constructed as shown above. Power is transmitted from the transmission
through the propeller shaft and to the spiral bevel pinion shaft, then to the spiral bevel gear after that to the differential
gear. The power through the differential is transmitted to the differential yoke shaft and to the bevel gear shaft in the
bevel gear case. The revolution is greatly reduced by the bevel gears, then the power is transmitted to the axle. The
differential system allows each wheel to rotate at a different speed to make turning easier.
(9) Bevel Gear Shaft
(10) 18T Bevel Gear
(11) Case 1 (Option)
(12) Differential Lock Clutch
(13) Differential Lock Spring
(14) Differential Case
(15) 27T Bevel Gear
(16) Collar
M6-M1
(17) External Snap Ring
(18) 63T Internal Gear
(19) Plug
(20) 13T Bevel Gear
(21) Front Axle Case
(22) Oil Seal
(23) Oil Seal
(24) Differential Yoke Shaft
FRONT AXLE
(25) O-Ring
(26) Front Differential Case
(27) Differential Lock Lever
(28) Propeller Shaft
(29) 18T Bevel Pinion Shaft
(30) Pinion Shaft
(31) Differential Pinion Gear
KiSC issued 04, 2006 A
Hide quick links:
Advertisement
