Advertisement
M9000DT-M, WSM
[2] SERVICING
(1) Tightening Toques
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-13.)
Rear wheel mounting nut
Drop axle case mounting screw and nut
Drop axle case mounting nut
Rear axle nut
(2) Checking, Disassembling and Servicing
(A) Separating Drop Axle Case from Rear Axle Case
Item
M12 grade 9
Draining Transmission Fluid
• See page MG-4.
Rear Wheel
1. Place disassembling stand under the transmission case.
2. Remove the three point linkage (2).
3. Remove the rear wheel (1).
(When reassembling)
Tightening torque
(1) Rear Wheel
Drop Axle Case Assembly
1. Remove the drop axle case mounting screws.
2. Support the drop axle case (3) with nylon lift strap and hoist.
3. Separate the drop axle case (3) from rear axle case (1).
Tightening torque
(1) Rear Axle Case
(2) With 80 in. Wide Axle Spacer
N·m
259.9 to 304.0
77.5 to 90.2
103.0 to 117.7
441.3 to 539.4
Rear wheel mounting nut
Drop axle case mounting
screw and nut
(Option)
M4-S1
REAR AXLE
kgf·m
ft-lbs
26.5 to 31.0
191.7 to 224.2
7.9 to 9.2
57.1 to 66.5
10.5 to 12.0
76.0 to 86.8
45.0 to 55.0
325.5 to 397.8
259.9 to 304.0 N·m
26.5 to 31.0 kgf·m
191.7 to 224.2 ft-lbs
(2) Three Point Linkage
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
57.1 to 66.5 ft-lbs
(3) Drop Axle Case
W1012736
W1010728
W1010773
W1010912
KiSC issued 04, 2006 A
Hide quick links:
Advertisement
