Advertisement
M9000DT-M, WSM
Steering Wheel, Meter Panel and Bonnet
1. Remove the steering wheel (1) with a steering wheel puller
(Code No. 07916-5-1090).
2. Remove the shuttle lever grip (2).
3. Remove the meter panel mounting screw and disconnect the
meter cable (4).
4. Disconnect the connectors (6).
5. Disconnect the main switch connector (7) and headlight switch
connector, hazard and turn signal switch connector.
6. Disconnect the engine stop cable (8) at the engine side.
7. Remove the rear bonnet (3).
8. Remove the fuse box (9) and cover (10).
(1) Steering Wheel
(2) Shuttle Lever Grip
(3) Rear Bonnet
(4) Meter Cable
(5) Meter Panel
Piping for Power Steering
1. Disconnect the turning delivery hoses (2) and (3).
2. Disconnect the main delivery pipe (4).
3. Disconnect the return pipe (1).
4. Remove the steering controller mounting screws.
5. Remove the steering controller.
(When reassembling)
Main delivery pipe and
return pipe retaining nut
Turning delivery hose
Tightening torque
retaining nut
Steering controller
mounting screws
(1) Return Pipe
(2) Left Turning Delivery Pipe
Piping for 3-Point Hydraulic System
1. Remove the accelerator rod (1).
2. Remove the suction pipe (3).
3. Remove the delivery pipe (4) for 3-point hydraulic system.
4. Remove the delivery pipe (2) for power steering.
(1) Accelerator Rod
(2) Delivery Pipe
M3-S3
TRANSMISSION
(6) Connectors
(7) Main Switch Connector
(8) Engine Stop Cable
(9) Fuse Box
(10) Cover
W1011214
46.6 to 51.0 N·m
4.8 to 5.2 kgf·m
34.7 to 37.6 ft-lbs
24.5 to 29.4 N·m
2.5 to 3.0 kgf·m
18.1 to 21.7 ft-lbs
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
(3) Right Turning Delivery Pipe
(4) Main Delivery Pipe
W1011609
(3) Suction Pipe
(4) Delivery
W1011808
KiSC issued 04, 2006 A
Hide quick links:
Advertisement
