Kubota M9000DT-M Workshop Manual Supplement page 13

M9000DT-M, WSM
[5] SPECIAL TOOL
Rear Axle Nut Wrench 92
Application: Use for removing and installing a rear axle nut.
A 177 mm (6.97 in.)
B 130 mm (51.2 in.)
C 20 mm radius (0.79 in. radius)
D 59.5 mm radius (2.34 in. radius)
E 85.5 to 86.1 mm (3.37 to 3.39 in.)
F 92.5 to 93.1 mm dia. (3.64 to 3.67 in. dia.)
G 69 mm (2.72 in.)
H 10 mm radius (0.39 in. radius)
I 30 mm (1.18 in.)
J 7.6 to 7.8 mm (0.3 to 0.31 in.)
K 14 mm (0.55 in.)
C0.5 Chamfer 0.5 mm (0.0197 in.)
C0.7 Chamfer 0.7 mm (0.0276 in.)
C2 Chamfer 2 mm (0.079 in.)
MG-6
G GENERAL
KiSC issued 04, 2006 A