Kubota M9000DT-M Workshop Manual Supplement page 28

M9000DT-M, WSM
Steps
1. Disconnect the foot accelerator rod (2).
2. Remove the steps (1).
(1) Steps
Fuel Tanks
1. Remove the fuel hose (1), (2), (3), (4).
2. Remove the tank bands (6).
3. Remove the fuel tanks (5).
(1) Fuel Hose 1
(2) Fuel Hose 2
(3) Fuel Hose 3
Hydraulic Pipes and Brake Rod
1. Remove the suction pipe (1).
2. Remove the delivery pipe (2) for three point hydraulic system.
3. Remove the brake rods.
(1) Suction Pipe
Auxiliary Shift Lever
1. Disconnect the shift rod L
2. Remove the external circlip (3).
3. Take out the shift lever assembly.
(When reassembling)
• Be sure to adjust the shift rod length.
Shift rod length L Factory spec.
1
Shift rod length L Factory spec.
2
(1) Shift Rod
(2) Shift Rod
M3-S7
TRANSMISSION
(2) Foot Accelerator Rod
(4) Fuel Hose 4
(5) Fuel Tank
(6) Tank Band
(2) Delivery Pipe
(1) and L (2).
1 2
Approx. 318 mm
12.52 in.
Approx. 250 mm
9.84 in.
(3) External Circlip
(4) Shift Lever
W1014294
W1014446
W1014576
W1014666
KiSC issued 04, 2006 A