M9000DT-M, WSM
Changing Front Differential Case Oil
1. To drain the used oil, remove the drain plug (3) and oil inlet port
plug (1) at the front differential case and drain the oil completely
into the oil pan.
2. After draining reinstall the drain plug (3).
3. Remove the oil level check plug (2).
4. Fill with the new oil up to the lower rim of check plug port.
(See page MG-2.)
5. After filling reinstall the oil inlet port plug (1) and check plug (2).
Standard
Oil Capacity
With 80 in. wide axle
(1) Oil Inlet Port Plug
(2) Check Plug
MG-5
G GENERAL
6.0 L
6.3 U.S.qts.
5.3 Imp.qts.
7.0 L
7.3 U.S.qts.
6.2 Imp.qts.
(3) Drain Plug
W1017992
KiSC issued 04, 2006 A