Top Cover For Exclusive Use Of Ne-S1Series : Nes1-Ffm-M - Hitachi NES1-004SB Quick Reference Manual

Func.
Code
(WOP)
H003
(Motor capacity)
H203
(Motor
capacity-M2)
H004
(Motor poles)
H204
(Motor poles-M2)
H006
(M.stabil.const)
H206
(M.stabil.
const-M2)
13.2 Top cover for exclusive use of NE-S1series：NES1-FFM-M
・Prepared exclusive top cover NES1-FFM-M (Afterward FFM) to improve usability of the inverter.
The applicable models are as follows. There are respective effects.
① Effect to improve derating properties
② Effect to improve Capacitor life
③ Effect not to let dust invade it from the upper part
④ Effect to reduce an installation area at the time of plural mount installation
Applicable model：NES1-015～022SB/LB,007～040HB
Note) Please do not be attached to the inverter which is not an applicable model. There might be an
injury, the fire. In addition, cause the inverter discarding.
13.2.1 Mounting method
・Because mounting method varies according to inverter, please be careful.
① NES1-015～022SB/LB,022HB,040HB ②NES1-015HB ③NES1-007HB
When the inverter which I purchased is included in ①, fit FFM in the cover upper surface of the main
body of inverter, and, please use it.
When the inverter which I purchased is included in ②, After having removed (shaded area) surgically in
nippers for back side tang of FFM of figure 2, fit FFM in the cover upper surface of the main body of
inverter, and, please use it.
When the inverter which I purchased is included in ③, After having removed (shaded area) surgically in
nippers for back side tang of FFM of figure 2 and 3, fit FFM in the cover upper surface of the main body of
inverter, and, please use it.
"H" Function
Name
Twelve selections:
Motor capacity
0.10/0.20/0.40/0.5
5/0.75/1.10/1.50/2
Motor capacity,
.20/3.00/3.70/4.00
nd
2 motor
Motor poles setting
Five selections:
Motor poles setting,
nd
2 motor
Motor stabilization
constant
Motor stabilization
range is 0 to 255
nd
constant, 2 motor
Run
Mod
e
Description
Edit


/5.50

2 / 4 / 6 / 8


Motor constant
(factory set),

13 - 55
Chapter 13 Option
Defaults
Initial data Initial data Initial data
standard CHN EU
200/400 200/400 200/400
Specifie
← ←
d by the
capacity
of each
← ←
inverter
model
4
← ←
4 ← ←
100. ← ←
100. ← ←
Units
kW
kW
pole
s
pole
s

