(C) Key operations : This section shows the key operations of the digital operator and Dedicated operator
(NES1-OP).
Group "d"
Func. code display
Group "F"
Func. code display
Group "A"
Func. code display
Group "b"
Group "C"
Group "H"
Group "d"
Note) Pressing the [ESC] key will make the display go to the top of next function group, regardless the display contents.
(e.g. [ESC] )
Func. code display
SET
SET
Func. code display
ESC
SET
ESC
SET
ESC
ESC
ESC
ESC
Back to d001
: Moves to data display
.
ESC
: Jumps to the next group
ESC
Save
.
SET
ESC
.
SET
ESC
Data display (F001 to F003)
Data does not blink because of real time synchronizing
: Saves the data and returns to func. code display.
SET
ESC
SET
ESC
SET
ESC
Data display
When data is changed, the display starts blinking, which means that new
data has not been activated yet.
: Saves the data and returns to func. code display.
SET
: Cancels the data change and returns to func. code display.
ESC
Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
6 - 7
Chapter 6 Operation