Fr-A5Nd Compatible Mode - Mitsubishi Electric FR-A8ND Instruction Manual

7.3

FR-A5ND compatible mode

Switching to the FR-A5ND compatible mode enables the DeviceNet communication with the FR-A5ND specification.
 Switching procedure to the FR-A5ND compatible mode
MNS
ON
1 2
V- C-
SLD
NOTE
• Set the compatible mode switch before switching ON the inverter and do not change the setting while the power is
ON. Otherwise you may get an electric shock.
• Do not turn ON the switch 2 of the compatible mode switch.
96
OBJECT MAP
X10
0
X1
0
Compatible mode switch
Turning on switch 1 and off switch 2 when the inverter
power is off, then turning on the inverter will switch to
the FR-A5ND compatible mode. (Switch 1 and 2 are set
C+ V+
to OFF in the initial status.)
ON
1 2