Input To The Inverter From The Network - Mitsubishi Electric FR-A8ND Instruction Manual

5.2

Input to the inverter from the network

Main items which can be commanded from the network to the inverter and their descriptions are explained below.
Item
Frequency setting
Operation mode write
Run command
Inverter reset
Parameter write
Parameter clear
NOTE
• Refer to the Instruction Manual (Detailed) of the inverter for functions controllable from the network in each operation
mode.
Set the running frequency of the inverter.
Set the operation mode of the inverter.
Set the control input command such as forward operation signal (STF) and reverse
rotation signal (STR).
Reset the inverter.
Set parameters of the inverter.
Return parameters to the initial values.
Description Refer to page
45
77
45, 77
60, 77
81, 88, 90
60, 77
39
FUNCTIONS
5