7.12 Fr-E5Nd (Fr-E500-Knd) Compatible Mode - Mitsubishi Electric FR-A7ND E kit Instruction Manual

7.12 FR-E5ND (FR-E500-KND) Compatible Mode

Switching to the FR-E5ND (FR-E500-KND) compatible mode enables DeviceNet communication with the
FR-E5ND (FR-E500-KND) specifications.
(1) Switching procedure to the FR-E5ND (FR-E500-KND) compatible mode
0 0
V-
CAN-
SW2
X10 X1
SW1
SHIELD
CAN+
V+
CAUTION
• Set the compatible mode switch (SW3) before switching ON the inverter and do not change the setting while
the power is ON. Otherwise you may get an electric shock.
• Do not turn ON the switch 2 of the compatible mode switch (SW3).
LED1
2
1
MNS
FR-A7ND
Compatible mode switch (SW3)
Turning on switch 1 and off switch 2 when the inverter
power is off, then turning on the inverter will switch to the
FR-E5ND (FR-E500-KND) compatible mode.
(Switch 1 and 2 are set to OFF in the initial status.)
OBJECT MAP
89
7