System Description; Operating Procedures - Mindray BA-88A Service Manual

3.1

Operating Procedures

The typical operating procedure of BA-88A is shown as follows:
Figure 3-1 Operating procedure
Procedures:
1 Empty the waste. Connect the waste tubing to the waste container. Prepare
the samples, reagents and distilled water;
2 Connect power cable correctly. Power on the analyzer. The instrument will
under go the initialization processes, including; system startup, hardware
self-check, parameters download, dark current testing. After initialization,
wait until the temperature and the light source are stable. The whole
process lasts for about 15 minutes;
3 After the system is stable, set the parameters of the tests, such as
wavelength, temperature, methods and etc. Start the test.
3

System Description

Other
tests
Lamp
stabilization Reaction
Temperature
stabilization
3 System Description
All the
tests
finished
3-1