Mindray BA-88A Service Manual page 65

2 Locate the position where the peristaltic pump is installed. Pull out the
tubing that goes through the backboard of the analyzer for 40-50mm until
the adapter is exposed. Pinch the two buckles on the left and right side of
the pump shell and detach the pump head carefully.
3 After detaching the pump head, unplug the tubing (yellow) whose adapters
are closer to the pump head.
5 Service and Maintenance
Pull the
tubing out
slightly
Pinch the
buckles to
detach the
pump head
Unplug the
tubing
(yellow)
whose
adapters
are closer
to the pump
head.
5-13