If ink has not been drained from the printer when moving it to another place on the same floor, then an operation check (Test Print) needs to be performed after the

printer is moved to a new location.

2. Installing the printer on a different floor

If ink has been drained when transporting the printer to a different floor, follow the installation procedure below. It is nearly identical to the procedure when install-

ing for the first time.

1) Remove the cushioning materials and tape.

2) Connect the power cord and interface cable.

3) Turn on the power and following the instruction in the message to install the ink tank. The ink is filled.

4) After the ink has been filled, load the media, and perform the operation check.

3-6

Table of Contents