Canon iPF780 Series Service Manual page 202

Display message
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Ink tank error.
Press OK and replace ink tank.
Maintenance cartridge full.
Replace the maintenance cartridge.
No Maintenance Cartridge capacity.
Replace the maintenance cartridge.
No maintenance cartridge.
Check the maintenance cartridge.
Maintenance cartridge problem.
Replace the maintenance cartridge.
Maintenance cartridge problem.
Replace the maintenance cartridge.
Push paper a little
Manual printing is selected, but a roll is
loaded.
Press Load/Eject and remove the roll.
Top paper feed slot is selected.
Press OK and load a sheet.
Sheet printing is selected.
Press Load/Eject and load sheets.
Remove the cut sheets.
Roll printing is selected, but sheets are
loaded.
Press OK, remove the sheets, and load a
roll.
This type of media is not
compatible with HP-GL/2.
! Cannot print as selected.
Another roll is in use.
Stop: Stop Printing
! Cannot print as selected.
Another roll is in use.
Stop: Stop Printing
Borderless printng not possible.
Check roll position.
Online: Print
Load/Eject: Change Paper
Borderless printng not possible.
Check paper size setting.
Borderless printng not possible.
Paper stretched or shrank.
Confirm usage cond. of the paper.
Borderless printng not possible.
Check supported paper.
Insufficient paper for job
Online: Print
Stop: Stop Printing
Load/Eject: Change Paper
Insufficient paper for job
Insufficient paper for job
Cannot adjust printhead.
Press Online to clear the error and
readjust printhead.
Cannot adjust printhead.
Press Online to clear the error and
readjust printhead.
Cannot adjust eccentric.
Press Online to clear the error.
Code* Condition detected
03830206-2547 MBK2 ink tank ID error
03830207-254A R ink tank ID error
03830208-254C G ink tank ID error
03830209-254B B ink tank ID error
03830212-2544 PM ink tank ID error
03830213-2545 PC ink tank ID error
03830215-2549 PGY ink tank ID error
03841001-2819 Maintenance cartridge full
03841001-281B Not enough space in the maintenance
cartridge prior to cleaning
03841101-2818 Maintenance cartridge not installed.
03841201-2816 Maintenance cartridge EEPROM error
03841201-2817 Maintenance cartridge ID error
03860001-2E06 Waiting for manual feed paper to be
inserted.
03860001-2E0C Data with a cut sheet specification has been
received when roll media are loaded.
03860002-2E02 Data with a cut sheet specification has been
received but no cut sheets are loaded.
03860002-2E05 Manual feed paper setting job has been
received, but no manual feed paper is
loaded.
03860002-2E07 Waiting for manual feed paper to be
removed.
03860002-2E0A Data with a roll media specification has
been received when a cut sheet tray is
loaded.
03860006-2825 Paper type mismatch at HP-GL/2 printing Exchange for the compatible paper to HP-GL/2 before
03860007-2E40 Lower roll data has been received when
there is print in the upper roll.
03860007-2E41 Lower roll data has been received when
there is print in the lower roll.
03861001-2405 Paper loaded at a position inaccessible for
borderless printing
03861001-2406 Data unfit for borderless printing
03861001-2407 Borderless printing disabled (engine
detection)
03861001-2408 Borderless printing disabled (unsupported
size)
03862000-2E09 Not enough roll media on remaining roll
media quantity detection
03862001-2E31 Not enough roll media
03862002-2E32 Not enough roll media (lower roll)
03863000-2820 Printhead registration unadjustable
03863000-2821 LF unadjustable
03863000-2822 Eccentricity correction disabled
Action
Replace with a valid MBK ink tank.
Replace with a valid R ink tank.
Replace with a valid G ink tank.
Replace with a valid B ink tank.
Replace with a valid PM ink tank.
Replace with a valid PC ink tank.
Replace with a valid PGY ink tank.
Renew the maintenance cartridge.
Replace the maintenance cartridge.
Install the maintenance cartridge.
Renew the maintenance cartridge.
Renew the maintenance cartridge.
Push the cut sheet a little.
Load cut sheets at the paper tray port.
Load cut sheets at the paper tray port.
Load cut sheet in the manual feed paper slot.
Remove the cut sheet.
Replace with roll media.
reprinting.
Press the Stop button to delete the print job.
Press the Stop button to delete the print job.
Check to see if a borderless printing spacer is installed.
Reload the paper.
Check the data, and then print again.
Reload the paper.
Check the media size.
Renew the supply of roll media.
Renew the supply of roll media.
Renew the supply of roll media.
Check the paper on which a pattern is printed for smears.
Check the environment for interferences from outside
light.
Clean the printhead.
Check the paper on which a pattern is printed for smears.
Check the environment for interferences from outside
light.
Clean the printhead.
Check to see if paper has not jammed.
Chapter 6
6-15