Canon iPF780 Series Service Manual page 120

Chapter 3
a. Moving the printer on the same floor with no difference in grade
Item
[Prep. MovePrinter] on the Main menu This need not be performed.
Allowed tilting angle
Ink consumption
Ink tank
Separation of printer and stand
Maintenance cartridge
Replacement of consumable parts
Service support
Transportation procedure
1) Turn off the [Power] button, and check that the head is capped and carriage is locked.
2) Remove the roll holder from the roll unit.
3) Remove the interface cable and power cord from the printer.
4) Unlock the casters on the stand.
5) Move the printer slowly by holding the carrying handles at the bottom.
- If the printer is subjected to strong vibrations when it is moved, it can cause ink leakage or damage to the printhead. Be sure to move the printer slowly and care-
fully.
- Do not incline the printer during transportation. The internal ink may leak and the surrounding area may be stained.
3-2
Do not tilt.
No ink is consumed.
It may be installed or removed.
They do not need to be separated.
Install.
There is no need to open a new maintenance cartridge.
There is no need to replace consumable parts.
No service support is necessary.
Description