1) Move the carriage onto the platen. Refer to "Disassembly/Reassembly > Points to Note on Disassembly and Reassembly > Opening the Cap/Moving the Wiper

Unit".

2) Remove the left/right cover.

3) Remove one screw [1], and then remove the carriage upper cover [2].

4) Remove one screw [1], pulley retainer [2] and spring [3] to loosen the carriage belt [4]. Remove the belt from the pulley unit [5], and then the pulley unit [5].

4-16

F-4-30

[4]

[2]

[1]

F-4-31

[1]

[2]

[3]

[5]

Table of Contents