Canon iPF780 Series Service Manual page 244

3.3 Service Mode Menu Tree
First Level
DISPLAY
I/O DISPLAY
ADJUST
FUNCTION
REPLACE
COUNTER
SETTEING
INITIALIZE
* Press key to move to the next menu of the same layer, and press
* The menus shown in '*1' are the e-RDS-related menus.
3.4 e-RDS Related Setting Details
1) e-RDS's Operation Mode [E-RDS SWITCH]
In service mode, referring to the "Service Mode Menu Tree", go to [E-RDS SWITCH] menu using
(1) Choose between [ON] or [OFF] using the
(2) Press [OK] key to determine the operation mode and go back to the previous screen.
- When the operation mode is determined, "=" will be displayed.
- OFF: When it is set to [OFF], e-RDS is not used. Default value is OFF.
- ON: When it is set to [ON], e-RDS is used.
Second Level Third Level
Pth
RTC
PV AUTO JUDGE
NETWORK CERTIFICATE
E-RDS E-RDS SWITCH:*1
UGW-ADDRESS:*1 http://XXX
UGW-PORT:*1
COM-TEST:*1
COM-LOG:*1
HEAD DOT INF
WARNING
ERROR
JAM
ADJUST
W-INK
CARRIAGE
PURGE
INK-USE CNT
W-INK-CHG CNT
HEAD-CHG CNT
HDD BOX PASS
PARTS-CHG CNT
PARTS COUNTER
USER SETTEING
CA-KEY:*1 YES/NO
ERDS-DAT:*1 YES/NO
JOB LOG YES/NO
and keys.
E - R D S
O F F
E - R D S
= O N
Fourth Level
CA-CERTIFICATE VALIDITY:*1
ON/OFF
XXXXX
YES
key to move to the menu of one layer deeper.
key and
S W I T C H
F-7-38
S W I T C H
F-7-39
Fifth Level Sixth Level
yyyy/mm/dd
key.
Chapter 7
7-31