Canon iPF780 Series Service Manual page 240

Display
W-INK-CHG CNT
HEAD-CHG CNT
HDD BOX PASS. ALL FOLDERS
FOLDER xx
PARTS-CHG PARTS xx-x
CNT
PARTS PARTS xx-x
COUNTER
USER SETTING
CA-KEY
ERDS-DAT
JOB LOG
Initialize the maintenance cartridge replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [MTC EXC.], and count up [COUNTER] > [CLEAR]
> [CLR-MTC EXC.])
Initialize the printhead replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [HEAD EXC.], and count up [COUNTER] >
[CLEAR] > [CLR-HEAD EXC.])
Initialize the BOX password of all folders of the hard disk drive to factory default.
Initialize the BOX password of FOLDER xx of the hard disk drive to factory default.
xx-x: Unit number of consumable parts
(For details, refer to "Maintenance and Inspection" > "Consumable Parts")
Initialize the consumable part replacement frequency.
(Clear [COUNTER] > [EXCHANGE] > [xx-x EXC], and count up [COUNTER] > [CLEAR]
> [CLR xx-x EXC.])
xx-x: Unit number of consumable parts
(For details, refer to "Maintenance and Inspection" > "Consumable Parts")
Initialize the counter amount of the consumable parts.
(Clear [COUNTER] > [PARTS CNT.] > [COUNTER xx-x])
* After replacing the consumable part, be sure to execute this menu.
Initializes the user menu.
Same as executing the following mode in the user menu.
-[Set./Adj. Menu]-[System Setup]-[Reset PaprSetngs]
-[Set./Adj. Menu]-[Interface Setup]-[Return Defaults]
See "e-maintenance/imageWARE Remote" for detail.
See "e-maintenance/imageWARE Remote" for detail.
Initialize the history of JOB LOG.
Description
Chapter 7
7-27