Installing Your Multicell Transport - Agilent Technologies 8453 Operator's Manual

1 Place the multicell transport in the sample compartment of the
Figure 2
2 Move the cell holder of the multicell transport manually to the left-most
3 Run the multicell transport cable through the channel underneath the
Installing and Operating Your Multicell Transport

Installing Your Multicell Transport

Installing Your Multicell Transport
Mounting the Multicell Transport
spectrophotometer.
Top View of Multicell Transport in Spectrophotometer
position and tighten the screw at the right side. Move it now to the right-most
position and tighten the screw at the left side.
instrument and plug it in the connector at the rear.
Mounting screw
15