Operating Your Multicell Transport - Agilent Technologies 8453 Operator's Manual

Installing and Operating Your Multicell Transport

Operating Your Multicell Transport

Operating Your Multicell Transport
Controlling Your Multicell Transport
The Agilent ChemStation software for UV-visible spectroscopy offers a user
interface that controls the multicell transport manually or automatically
during an analysis. Refer to the help system in the software for details of how
to operate your multicell transport.
Inserting Cells in the Multicell Transport Cell Holder
The multicell transport cell holder can hold up to eight standard cells or flow
cells. Insert the cell in the cell holder. The cell is held in place by a flat spring
inside the cell holder. No additional clamping mechanism is needed to hold
the cells in place.
Figure 9 Inserting Cuvettes in Cell Holder
Inserting a cell in position 5
All cell positions are labeled with numbers corresponding to the cells
numbers shown in the graphical user interface of the Agilent ChemStation
software.
23