Agilent Technologies 8453 Operator's Manual page 22

1 Remove the multicell transport from the sample compartment. See "Removing
2 Screw the filter ring into the threaded drilling of the rear part of the multicell
Figure 8
Filter ring
Threaded hole for filter ring
3 Reinstall the multicell transport into the sample compartment. See "Installing
Installing and Operating Your Multicell Transport
Installing the Filter Kit
To Install the Filter Ring
the Multicell Transport from the Spectrophotometer" on page 25.
transport.
Installing the Filter Ring on the Multicell Transport
Your Multicell Transport" on page 15.
22