Agilent Technologies 8453 Operator's Manual page 19

Installing and Operating Your Multicell Transport
Installing the Stirring Module
4 Reinsert the cell holder and screw down the cell holder screws finger tight.
Connecting the Water Supply Tubing for the Stirring
Module
1 Cut the tubing into two pieces of desired length.
2 Connect the tubing to the inlet and outlet fittings. Connect the outlet of the
water supply to inlet fitting (D) on the stirring module and connect the outlet
fitting (E) on the stirring module to the inlet of the water supply. see Figure 5.
3 Adjust the water flow to achieve the appropriate stirrer speed.
19