Stop Your Video
Procedure
Step 1
Press PiP
ring to move the PiP window.
Step 2
(Optional) Press Swap to toggle between the full-screen view and the PiP view.
Stop Your Video
When you're on a video call, you can close the shutter to stop video transmission.
When you close the shutter, the person you're talking to won't see you, but they'll still be able to hear you.
Procedure
Step 1
Turn the ring around the camera counterclockwise to close the shutter. The phone stops video transmission.
Step 2
Turn the ring around the camera clockwise to open the shutter. The phone starts video transmission.
Adjust the Camera Exposure
You can adjust the camera exposure for the ambient light in your office. Adjust the exposure to change the
brightness of the transmitted video.
Before you begin
The camera shutter must be open.
Procedure
Step 1
Press Applications
Step 2
Select User Preferences > Video > Exposure.
Step 3
Press the Navigation cluster left or right to decrease or increase, the exposure.
The exposure range is 0 to 15, and the default value is 8.
Step 4
Click Set.
Adjust the Video Bandwidth
During a video call, your video can suddenly stop or lag behind the audio. The lag is often caused by a busy
network.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
36
to move the PiP window counterclockwise around your phone screen. Or, use the Navigation
.
Calls