Phone Setup; Adjust The Handset Rest - Cisco 8841 User Manual

Your Phone
Revision
Added Key Expansion Module support
Added Provisioning Authority support
Added Busy Lamp Field support
Updated Call Park support

Phone Setup

Typically, your administrator sets up your phone and connects it to the network. If your phone is not set up
and connected, contact your administrator for instructions.

Adjust the Handset Rest

If your phone is wall-mounted or if the handset slips out of the cradle too easily, you may need to adjust the
handset rest to ensure that the receiver does not slip out of the cradle.
Updated Section
Cisco IP Phone Key Expansion Module Setup
Overview, on page 94
Key Expansion Module Buttons and Hardware, on
page 95
Modify a Speed Dial on a Key Expansion Module,
on page 97
Sign into Your Extension from Another Phone, on
page 7
Sign out of Your Extension from Another Phone, on
page 8
Monitor a Coworker's Line, on page 9
Call Park, on page 31
Place a Call on Hold with Call Park, on page 31
Retrieve a Call on Hold with Call Park, on page 32
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
Phone Setup
5