Video Call Security And Troubleshooting Information; Record A Call - Cisco 8841 User Manual

Calls
By default, your phone automatically selects a bandwidth setting that balances the audio and video network
requirements.
You can configure a fixed bandwidth setting to override the automatic selection, if required for your network
conditions. If you configure a fixed bandwidth, select a setting and adjust downwards until there is no video
lag.
Procedure
Step 1
Press Applications
Step 2 Select User Preferences > Video > Bandwidth allowance.
Step 3
Choose a bandwidth setting in the Bandwidth allowance screen.
Step 4 Click Select to set the bandwidth.

Video Call Security and Troubleshooting Information

Your administrator can take steps to protect your video calls from tampering by people outside your company.
If you see the Secure icon displayed during a video call, your administrator has taken steps to ensure your
privacy.
When you are in a video call, the video can fail if there is insufficient network bandwidth. The audio continues,
but the video stops. If you require the video, hang up, wait a few minutes, and start the call again. If there is
still insufficient bandwidth, contact your administrator.

Record a Call

When you are on an active call, you can record it. You might hear a notification tone as you record the call.
During a recording, you see different icons in different recording state. You see the icons on the Calls screen
and also on the line key on which you are recording a call.
Table 3: Recording Icons
Icon
Before you begin
Your administrator enables your phone with call recording.
.
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
Video Call Security and Troubleshooting Information
Meaning
Recording in progress
Recording in progress (8811)
Recording paused
Recording paused (8811)
37