Usb Headsets; Connect A Usb Headset - Cisco 8841 User Manual

Accessories
Procedure
Plug the headset into the jack on the back of the phone and press the cable into the cable channel.
Figure 5: Standard Headset Connection
Caution

USB Headsets

You can use a USB headset for your calls if your phone has a USB port.
If your phone has more than one USB port, only one USB headset can be connected at a time.
For a list of supported headsets, see
headsets that are not listed may not function properly if you attach them to the USB port. For more information,
see the documentation from your USB headset manufacturer.

Connect a USB Headset

When you use USB headsets with your phone, keep in mind:
• You can use only one headset at a time. The most-recently connected headset is the active headset.
• If you are on an active call and unplug a USB headset, the audio path does not change automatically.
• If you are on an active call and unplug a USB headset, the audio changes automatically to the speaker.
• If you are on an active call and plug in a USB headset, the audio changes to the USB headset.
Failure to press the cable into the channel in the phone can damage the printed circuit board inside
the phone. The cable channel reduces the strain on the connector and the printed circuit board.
You need to press the Speakerphone button or pick up the handset.
Unified Communications Endpoint and Client
Cisco IP Phone 8800 Series Multiplatform Phones User Guide
USB Headsets
Accessories. USB
89