Make A Video Call; Stop Your Video; Toggle Between Phone And Video Display - Cisco 8811 User Manual

Make a Video Call

Related Topics
Video Settings, on page 70
Make a Video Call
Cisco IP Phones 8845 and 8865 support video calls as long as the person you're calling also has a video phone.
Toggle between the full screen view and the picture-in-picture (PiP) view by pressing Swap. Swap is not
Tip
available when PiP is off.
When you put a video call on hold, the audio is muted and the video stops.
You can check your appearance before starting a video call by selecting Self-view.
Procedure
Make an audio call with the video camera shutter open.

Stop Your Video

If you're using a video phone (Cisco IP Phone 8845 or 8865), you can stop sending video while you're on a
call.
But closing a shutter does not end a call or put a video call on hold. When you put a video call on hold, it
stops both the video and the audio.
Procedure
Step 1 Close the camera shutter by turning it counterclockwise.
Step 2 Open the video camera shutter by turning it clockwise.

Toggle Between Phone and Video Display

When you hide the video, it moves to the background and is displayed with a blurred effect. Hide your video
when you want to see the phone desktop.
Procedure
Step 1 Press Hide video to hide the video.
Step 2 Press Show video to show the video.
Cisco IP Phone 8800 Series User Guide
30
Calls