Weighing - Accuris W3101A-120 Operation Manuals

5
6
5
6

Weighing

After connecting the balance to a power outlet, a self-diagnosis of the electronic circuits is
automatically carried out, and when finished "off" is displayed to indicate standby mode:
Figure 2
5. Balance closure screws
6. Weighing hook under the balance
Note: to access, remove the cap
7
7. Shipping protection screw for auto
calibration motor (only for models
with internal calibration).
ATTENTION: remove this screw
by hand as soon as the balance
is removed from its package
Off
8